Don't let your house
go up in flames
Get it right the first time

 

Got Question? Get Answers

 

Home 'Switch and Outlet Wiring Made Easy'

4 Way Switches

Power Source at 3rd Switch - Feed to 2nd Switch

Read the legal disclaimer page - click the legal link in the menu at bottom of page

Back to Main Article - CLICK HERE

Extensions to this Switch circuit...

Be Aware that there is a limit by code on how many wires can be in a given size electrical box, when adding more wires to the same box you may have to install a larger and / or deeper box to allow space for more wires coming and out of the box.

Here is an article / explanation in regards to box fill calculations (on our sister website 'Wiring Done Right') 'Box Fill Calculation'

The instructions here are based on the fact that the circuit has already been wired to the configuration shown in this article and we are now making the wiring changes for onward power.

From the fixture location...

Only switched onward power is available from the fixture location.

Option 1: Onward switched power...
(example more than one light fixture controlled by the same switches)
(showing bellow the fixture portion of the circuit)

Onward Switched Power from Fixture

Not shown in the diagram but the onward cable also has a bare wire (equipment grounding conductor) that also must be connected to all the other bare wires at the fixture electrical box.

Connection Instructions for onward cable (switched)

* a) Using an insulated wire nut, connect / join - the black wire from switch 2 + the black wire connected to the ungrounded conductor (hot - switched) of fixture + the black wire of onward cable.
* b) Using an insulated wire nut, connect / join - the white wire from switch 2 + the white wire connecting to the grounded conductor (neutral) of fixture + the white wire of onward cable.

Identification of wires in onward cable....

Black - Switched ungrounded conductor (hot - switched)
White - Grounded conductor (neutral)

********

From the switch locations....

No onward connections are possible from the switch 1 location because no grounded conductor (neutral) is present here.

Switch 2 options...
Only switched onward power available at the switch 2 location.

 

Onward Switched Power from Switch 2

Not shown in the diagram but the onward cable also has a bare wire (equipment grounding conductor) that also must be connected to all the other bare wires at the switch electrical box.

Connection Instructions for onward cable (switched)

* a) Using an insulated wire nut, connect / join -  black wire coming from fixture + the black wire of onward cable + the black wire coming from switch 1.
* b) Using an insulated wire nut, connect / join - the white wire coming from fixture + the white wire coming from switch 3 + the white wire of onward cable.

Identification of wires in onward cable....

Black - Switched ungrounded conductor (hot - switched)
White - Grounded conductor (neutral)

**********

Switch 3 Options:
Only onward always on power is available from the switch 3 location

Onward always on power...

Onward Always On Power from Switch 3

Not shown in the diagram but the onward cable also has a bare wire (equipment grounding conductor) that also must be connected to all the other bare wires at the switch electrical box.

Connection Instructions for onward cable (always on)

* a) Using an insulated wire nut, connect / join - the white wire from switch 2  + the white wire coming from the 'circuit power supply cable' + the white wire of onward cable.
* b) Using an insulated wire nut, connect / join - the black wire connected to common screw of switch 3  + the black wire coming from the 'circuit power supply cable'  + the black wire of onward cable.

Identification of wires in onward cable....

Black - Ungrounded conductor (hot )
White - Grounded conductor (neutral)

Back to Main Article - CLICK HERE

Contact Us    /    Creator    /    Legal

Copyright 2012+
Donald Kerr / Switch and Outlet Wiring Made Easy / MegaGroup
All Rights Reserved
http://www.switchandoutlet wiringmadeeasy.com/