Electrical Shock

Electrical Switch Wiring - Switch And Outlet Wiring Made Easy

House Fire

Don't let your house
go up in flames
Get it right the first time

Contact us | Creator Info | Legal |Site Map

Fan / Light Combination Switch Wiring

Fan & Light Switched Separately

WHILE EXTREME CARE HAS BEEN IMPLEMENTED IN THE PREPARATION OF THIS SELF-HELP DOCUMENT, THE AUTHOR AND/OR PROVIDERS OF THIS DOCUMENT ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS, NOR IS ANY LIABILITY ASSUMED FROM THE USE OF THE INFORMATION, CONTAINED IN THIS DOCUMENT, BY THE AUTHOR and / OR PROVIDER.

Read the legal disclaimer page - click the legal link in the menu above

For those that live where the new 2011 NEC code is in effect, please read
2011 NEC New Rule 'Switch Connections'
If this applies to you, the switch wiring options that is in compliance with this new rule will be indicated bellow as '2011 NEC compliant'

 

For fan / light combination fixtures, this section has wiring scenarios that will use different switches to control the light and fan. The fan in each of the options is controlled by one basic switch at one location, the lights of the combination fixture is controlled by either a single basic switch or two 3 way switches. A set 3 way switches may be desired instances where the light / fan combination fixture is installed on the ceiling of a staircase or in a long hallway / large room. Any speed or direction controls for the fan would be controlled usually by a pull  spring on the combination fixture unless you install a specialized speed control device which would take the place of the standard basic switch depicted in the articles (see the warning message bellow)

WARNING (please read)....

Do not use a regular light dimmer on the fan, fans require a extra jolt to get the blade moving, there are special fan controllers that can be used to control fan speed at the switch location (replacing the regular switch with the special fan speed controller) these are specially made to control speed and insure the fan does get moving when on, the danger in regular dimmers not meant to control a fan is that the fan could get some power applied to it but not enough to get it moving what that can do is heat it up and become a fire hazard. If using a special fan controller ensure that the fans pull string (if they have it) are set to max speed and let the fan controller control the speed. You may still have another pull string on the fan that can change blade direction.

If you require further information or clarification please ask our experts on our forums.

By: Donald Kerr

Social Media Links

Help spread our popularity, get the word out, share us!
Facebook Twitter StumbleUpon Reddit LinkedIn  

MENU  

 

EZ Forums

Got Questions?
Get Answers!
Ask the Experts!

   
2011 NEC New Rule 'Switch Connections'
3 Way Switch
4 Way Switch
Adding an Outlet
Aluminium Wiring
Arc Circuit Protection
Basic Switch Wiring
Convert Pull String to Wall Switch
Definitions
Dryer Outlet
Electrical Dangers
Electrical Safety
Fan / Light combo
Fan / Light Switched Together
Fan / Light Switched Separately
Fan Always Hot / Light Switched
Generation / Distribution Grid
GFI Outlets
Main Electrical Panel
Multiple Fixtures
Old Homes / Wiring
Outlet, Half Switched
Range Outlet
Series Switches
Split Circuit Outlet
Testing Equipment, How to Use
Tools, Basic Tools
Wire Connections
World, Electricity around...
 

Copyright 2012+
Donald Kerr / Switch and Outlet Wiring Made Easy  / MegaGroup
All Rights Reserved
http://www.switchandoutletwiringmadeeasy.com/